HomeAll calculatorsBack

aggregate calculator for concrete uk

Calculation Formula:

Dry mass = Concrete volume × Aggregate content
Wet mass = Dry mass × (1 + Moisture ÷ 100)

m³
kg/m³
kg/m³
%
%

Choose the relevant mode and complete its visible inputs using the specified units. Optional density may be left blank for a volume-only estimate.

1. What Does This Tool Calculate?

aggregate calculator for concrete uk: Calculate separate sand and coarse-aggregate masses from a specified mix.

Choose the measurement method that matches your task, and use the input units shown for that mode.

2. Formula and Worked Example

Dry mass = Concrete volume × Aggregate content
Wet mass = Dry mass × (1 + Moisture ÷ 100)

Use the values in the units shown. The displayed equation converts the entered inputs into the labeled results; no unlisted product factor is applied.

Example: For 2 m³ with dry-basis contents of 700 and 1,100 kg/m³, dry masses are 1,400 and 2,200 kg. At 5% and 2% moisture, wet masses are 1,470 and 2,244 kg.

3. Planning Your Calculation

This mode uses dry-basis aggregate content and moisture relative to dry mass. An SSD design needs absorption and moisture corrections before using this dry-basis mode. This is not mix design or batch-water calculation.

4. Using the Calculator

  1. Enter finished concrete volume in m³.
  2. Enter specified dry-basis sand content in kg/m³.
  3. Enter specified dry-basis coarse aggregate content in kg/m³.
  4. Enter sand moisture relative to dry mass in %.
  5. Enter coarse aggregate moisture relative to dry mass in %.
  6. Click Calculate, then click the image on the next page to view your results.
  7. Review the units and assumptions before using the estimate.

5. Frequently Asked Questions

What values do I need?
Enter finished concrete volume, specified dry-basis sand content, specified dry-basis coarse aggregate content, sand moisture relative to dry mass, coarse aggregate moisture relative to dry mass.

What units does this tool use?
Input units: m³, kg/m³, %. Results show their own units. Do not mix unit systems.

Which assumptions matter?
This mode uses dry-basis aggregate content and moisture relative to dry mass. An SSD design needs absorption and moisture corrections before using this dry-basis mode. This is not mix design or batch-water calculation.

Where do my results appear?
Submit the form to the confirmation page, then click its image. The result page restores your entries and displays the calculation. Saved entries are available in the same browser for 30 minutes.

Can I change the entries?
Yes. Edit the form on the result page and calculate again. Each submission has a separate result link.

aggregate calculator for concrete uk © 2026