HomeAll calculatorsBack

calculate weight of granite

Calculation Formula:

Block V = L × W × t − Openings
Sphere V = πD³ ÷ 6
Ellipsoid V ≈ πLWH ÷ 6
Displacement V = After − Before
M = V × Solid density

m
m
m
m³
m
m³
m³
m³
kg/m³

Choose the relevant mode and complete its visible inputs using the specified units. Optional density may be left blank for a volume-only estimate.

1. What Does This Tool Calculate?

calculate weight of granite: Estimate stone or slab mass by geometry, displacement or known volume.

Choose the measurement method that matches your task, and use the input units shown for that mode.

2. Formula and Worked Example

Block V = L × W × t − Openings
Sphere V = πD³ ÷ 6
Ellipsoid V ≈ πLWH ÷ 6
Displacement V = After − Before
M = V × Solid density

Use the values in the units shown. The displayed equation converts the entered inputs into the labeled results; no unlisted product factor is applied.

Example: A 1 m × 0.5 m × 0.2 m slab with a 0.01 m³ opening has 0.09 m³ solid volume. At 2,700 kg/m³ it weighs 243 kg.

3. Planning Your Calculation

Use solid material density, not loose-aggregate bulk density. A mass estimate does not approve lifting equipment or site conditions.

4. Using the Calculator

  1. Choose measurement method.
  2. Enter block / ellipsoid length in m.
  3. Enter block / ellipsoid width in m.
  4. Enter block thickness / ellipsoid height in m.
  5. Enter opening volume in m³.
  6. Enter sphere diameter in m.
  7. Enter water volume before immersion in m³.
  8. Enter water volume after immersion in m³.
  9. Enter known solid volume in m³.
  10. Enter solid material density in kg/m³.
  11. Click Calculate, then click the image on the next page to view your results.
  12. Review the units and assumptions before using the estimate.

5. Frequently Asked Questions

What values do I need?
Enter measurement method, block / ellipsoid length, block / ellipsoid width, block thickness / ellipsoid height, opening volume, sphere diameter, water volume before immersion, water volume after immersion, known solid volume, solid material density.

What units does this tool use?
Input units: m, m³, kg/m³. Results show their own units. Do not mix unit systems.

Which assumptions matter?
Use solid material density, not loose-aggregate bulk density. A mass estimate does not approve lifting equipment or site conditions.

Where do my results appear?
Submit the form to the confirmation page, then click its image. The result page restores your entries and displays the calculation. Saved entries are available in the same browser for 30 minutes.

Can I change the entries?
Yes. Edit the form on the result page and calculate again. Each submission has a separate result link.

calculate weight of granite © 2026