HomeAll calculatorsBack

crush and run gravel near me calculator

Calculation Formula:

V = A × Depth
M = V × ρ
Trucks = max(ceil(M ÷ Payload), ceil(V ÷ Truck volume))
Cost = Trucks × Quote

ft² (US) / m² (metric)
in (US) / mm (metric)
short tons/yd³ (US) / kg/m³ (metric)
short tons (US) / kg (metric)
yd³ (US) / m³ (metric)
currency/truck

Choose the relevant mode and complete its visible inputs using the specified units. Optional density may be left blank for a volume-only estimate.

1. What Does This Tool Calculate?

crush and run gravel near me calculator: Estimate order quantity and truckloads using payload and truck-volume limits.

Choose the measurement method that matches your task, and use the input units shown for that mode.

2. Formula and Worked Example

V = A × Depth
M = V × ρ
Trucks = max(ceil(M ÷ Payload), ceil(V ÷ Truck volume))
Cost = Trucks × Quote

Use the values in the units shown. The displayed equation converts the entered inputs into the labeled results; no unlisted product factor is applied.

Example: US mode: 120 ft² at 3 in is 1.11 yd³. At density 1.4 and truck limits of 2 short tons and 1 yd³, two loads are needed. At 100 per load, cost is 200.

3. Planning Your Calculation

Local stock, delivery and prices come from suppliers. Use whichever capacity limit requires more loads.

4. Using the Calculator

  1. Choose unit system.
  2. Enter installed area in ft² (US) / m² (metric).
  3. Enter installed layer depth in in (US) / mm (metric).
  4. Enter matching bulk density in short tons/yd³ (US) / kg/m³ (metric).
  5. Enter usable payload per truck in short tons (US) / kg (metric).
  6. Enter usable volume per truck in yd³ (US) / m³ (metric).
  7. Enter quote per full truck in currency/truck.
  8. Click Calculate, then click the image on the next page to view your results.
  9. Review the units and assumptions before using the estimate.

5. Frequently Asked Questions

What values do I need?
Enter unit system, installed area, installed layer depth, matching bulk density, usable payload per truck, usable volume per truck, quote per full truck.

What units does this tool use?
Input units: ft² (US) / m² (metric), in (US) / mm (metric), short tons/yd³ (US) / kg/m³ (metric), short tons (US) / kg (metric), yd³ (US) / m³ (metric), currency/truck. Results show their own units. Do not mix unit systems.

Which assumptions matter?
Local stock, delivery and prices come from suppliers. Use whichever capacity limit requires more loads.

Where do my results appear?
Submit the form to the confirmation page, then click its image. The result page restores your entries and displays the calculation. Saved entries are available in the same browser for 30 minutes.

Can I change the entries?
Yes. Edit the form on the result page and calculate again. Each submission has a separate result link.

crush and run gravel near me calculator © 2026