Calculation Formula:
decomposed granite calculator coverage: Find coverage from volume or mass, or reverse to find volume from an area.
Choose the measurement method that matches your task, and use the input units shown for that mode.
Use the values in the units shown. The displayed equation converts the entered inputs into the labeled results; no unlisted product factor is applied.
Example: Two cubic yards at 3 in depth cover 216 ft². For mass-based coverage, first divide mass by density.
Area may be a rectangle (L × W), circle (πr²), ring (π(R² − r²)), or the sum of measured sections. Depth is the specified installed layer thickness, not stone particle size. Use bulk density for the same product, moisture and loose/compacted state. One US short ton is 2,000 lb; one metric tonne is 1,000 kg.
What values do I need?
Enter unit system, calculation direction, available quantity, matching bulk density, area to cover, installed layer depth.
What units does this tool use?
Input units: yd³ or short tons (US); m³ or kg (metric), short tons/yd³ (US); kg/m³ (metric), ft² (US) / m² (metric), in (US) / mm (metric). Results show their own units. Do not mix unit systems.
Which assumptions matter?
Area may be a rectangle (L × W), circle (πr²), ring (π(R² − r²)), or the sum of measured sections. Depth is the specified installed layer thickness, not stone particle size. Use bulk density for the same product, moisture and loose/compacted state. One US short ton is 2,000 lb; one metric tonne is 1,000 kg.
Where do my results appear?
Submit the form to the confirmation page, then click its image. The result page restores your entries and displays the calculation. Saved entries are available in the same browser for 30 minutes.
Can I change the entries?
Yes. Edit the form on the result page and calculate again. Each submission has a separate result link.