HomeAll calculatorsBack

retaining wall stone calculator

Calculation Formula:

V = L × [(Top width + Bottom width) × h ÷ 2 − Occupied area]
Pipe area = πDoutside² ÷ 4
M = V × ρ

m
m
m
m
m
m²
kg/m³

Choose the relevant mode and complete its visible inputs using the specified units. Optional density may be left blank for a volume-only estimate.

1. What Does This Tool Calculate?

retaining wall stone calculator: Calculate rectangular or trapezoidal backfill after subtracting occupied area.

Choose the measurement method that matches your task, and use the input units shown for that mode.

2. Formula and Worked Example

V = L × [(Top width + Bottom width) × h ÷ 2 − Occupied area]
Pipe area = πDoutside² ÷ 4
M = V × ρ

Use the values in the units shown. The displayed equation converts the entered inputs into the labeled results; no unlisted product factor is applied.

Example: A 10 m section with widths 1 m and 0.5 m, depth 0.6 m, pipe diameter 0.2 m and other occupied area 0.01 m² needs about 4.09 m³.

3. Planning Your Calculation

For a rectangle set top width equal to bottom width. Subtract only objects within the gravel zone. The pipe is counted once and must fit within the zone.

4. Using the Calculator

  1. Enter filled section length in m.
  2. Enter top width of filled section in m.
  3. Enter bottom width of filled section in m.
  4. Enter gravel-filled depth in m.
  5. Enter fully embedded pipe outside diameter in m.
  6. Enter other occupied cross-sectional area in m².
  7. Enter matching bulk density in kg/m³.
  8. Click Calculate, then click the image on the next page to view your results.
  9. Review the units and assumptions before using the estimate.

5. Frequently Asked Questions

What values do I need?
Enter filled section length, top width of filled section, bottom width of filled section, gravel-filled depth, fully embedded pipe outside diameter, other occupied cross-sectional area, matching bulk density.

What units does this tool use?
Input units: m, m², kg/m³. Results show their own units. Do not mix unit systems.

Which assumptions matter?
For a rectangle set top width equal to bottom width. Subtract only objects within the gravel zone. The pipe is counted once and must fit within the zone.

Where do my results appear?
Submit the form to the confirmation page, then click its image. The result page restores your entries and displays the calculation. Saved entries are available in the same browser for 30 minutes.

Can I change the entries?
Yes. Edit the form on the result page and calculate again. Each submission has a separate result link.

retaining wall stone calculator © 2026