HomeAll calculatorsBack

river rock yard calculator

Calculation Formula:

Vft³ = Aft² × din ÷ 12
Vyd³ = Aft² × din ÷ 324
Vm³ = Am² × dmm ÷ 1000

ft (US) / m (metric)
ft (US) / m (metric)
ft (US) / m (metric)
ft (US) / m (metric)
ft² (US) / m² (metric)
ft² (US) / m² (metric)
in (US) / mm (metric)

Choose the relevant mode and complete its visible inputs using the specified units. Optional density may be left blank for a volume-only estimate.

1. What Does This Tool Calculate?

river rock yard calculator: Calculate layer volume and material mass using the chosen units and area geometry.

Choose the measurement method that matches your task, and use the input units shown for that mode.

2. Formula and Worked Example

Vft³ = Aft² × din ÷ 12
Vyd³ = Aft² × din ÷ 324
Vm³ = Am² × dmm ÷ 1000

Use the values in the units shown. The displayed equation converts the entered inputs into the labeled results; no unlisted product factor is applied.

Example: A 10 ft × 12 ft rectangle at 3 in depth needs 30 ft³ or 1.11 yd³. Entered density 1.4 US short tons/yd³ gives 1.56 US short tons.

3. Planning Your Calculation

Area may be a rectangle (L × W), circle (πr²), ring (π(R² − r²)), or the sum of measured sections. Depth is the specified installed layer thickness, not stone particle size. Use bulk density for the same product, moisture and loose/compacted state. One US short ton is 2,000 lb; one metric tonne is 1,000 kg.

4. Using the Calculator

  1. Choose unit system.
  2. Choose area measurement.
  3. Enter length in ft (US) / m (metric).
  4. Enter width in ft (US) / m (metric).
  5. Enter circle radius / outer ring radius in ft (US) / m (metric).
  6. Enter inner ring radius in ft (US) / m (metric).
  7. Enter measured area in ft² (US) / m² (metric).
  8. Enter one area per line in ft² (US) / m² (metric).
  9. Enter installed layer depth in in (US) / mm (metric).
  10. Click Calculate, then click the image on the next page to view your results.
  11. Review the units and assumptions before using the estimate.

5. Frequently Asked Questions

What values do I need?
Enter unit system, area measurement, length, width, circle radius / outer ring radius, inner ring radius, measured area, one area per line, installed layer depth.

What units does this tool use?
Input units: ft (US) / m (metric), ft² (US) / m² (metric), in (US) / mm (metric). Results show their own units. Do not mix unit systems.

Which assumptions matter?
Area may be a rectangle (L × W), circle (πr²), ring (π(R² − r²)), or the sum of measured sections. Depth is the specified installed layer thickness, not stone particle size. Use bulk density for the same product, moisture and loose/compacted state. One US short ton is 2,000 lb; one metric tonne is 1,000 kg.

Where do my results appear?
Submit the form to the confirmation page, then click its image. The result page restores your entries and displays the calculation. Saved entries are available in the same browser for 30 minutes.

Can I change the entries?
Yes. Edit the form on the result page and calculate again. Each submission has a separate result link.

river rock yard calculator © 2026