HomeAll calculatorsBack

rock coverage calculator per ton

Calculation Formula:

Aft²/yd³ = 324 ÷ din
Aft²/short ton = 324 ÷ (din × ρ)

in
US short tons/yd³

Choose the relevant mode and complete its visible inputs using the specified units. Optional density may be left blank for a volume-only estimate.

1. What Does This Tool Calculate?

rock coverage calculator per ton: Calculate coverage for exactly one cubic yard or one US short ton.

Choose the measurement method that matches your task, and use the input units shown for that mode.

2. Formula and Worked Example

Aft²/yd³ = 324 ÷ din
Aft²/short ton = 324 ÷ (din × ρ)

Use the values in the units shown. The displayed equation converts the entered inputs into the labeled results; no unlisted product factor is applied.

Example: At 3 in, one yd³ covers 108 ft². At density 1.4 short tons/yd³, one short ton covers 77.14 ft².

3. Planning Your Calculation

Area may be a rectangle (L × W), circle (πr²), ring (π(R² − r²)), or the sum of measured sections. Depth is the specified installed layer thickness, not stone particle size. Use bulk density for the same product, moisture and loose/compacted state. One US short ton is 2,000 lb; one metric tonne is 1,000 kg.

4. Using the Calculator

  1. Enter installed depth in in.
  2. Enter matching bulk density in US short tons/yd³.
  3. Click Calculate, then click the image on the next page to view your results.
  4. Review the units and assumptions before using the estimate.

5. Frequently Asked Questions

What values do I need?
Enter installed depth, matching bulk density.

What units does this tool use?
Input units: in, US short tons/yd³. Results show their own units. Do not mix unit systems.

Which assumptions matter?
Area may be a rectangle (L × W), circle (πr²), ring (π(R² − r²)), or the sum of measured sections. Depth is the specified installed layer thickness, not stone particle size. Use bulk density for the same product, moisture and loose/compacted state. One US short ton is 2,000 lb; one metric tonne is 1,000 kg.

Where do my results appear?
Submit the form to the confirmation page, then click its image. The result page restores your entries and displays the calculation. Saved entries are available in the same browser for 30 minutes.

Can I change the entries?
Yes. Edit the form on the result page and calculate again. Each submission has a separate result link.

rock coverage calculator per ton © 2026